Fix Error Code 5B00 Canon MP237 Printer

How To Fix Canon MP237 Error Code 5B00

Canon Printer Error Code 5b00 is a common mistake in Canon MP237 printers, Canon MP237 error code 5B00 As we see, more and more ink spills occur on an ink cartridge.

The big reason is simply due to improper use of the correct ink cartridge or may even be due to the installation of the continuous ink system.

This 5B00 error message is more likely to appear on the Canon printer. Well, as the Canon Printer customer service said, if a user has installed one of these ink systems on the printer, it is advisable for users to read this blog about ink spills in the Canon CISS printers that generates a 5b00 error.

To clear the 5B00 error and reset the waste ink meter, proceed as follows:

How to Fix Canon MP237 Error Code 5B00

Canon MP237 Error Code 5B00
Step 1 :

Turn off the printer
1. Press and hold the Resume button, then hold down the POWER button, the beep will sound once.
2. Hold down POWER and release RESUME
3. Press RESUME twice, then release all buttons
4. When the light comes on, press RESUME three or four times. The indicator should be orange.
5. Press Power to set the data

2nd step :

1. Turn off the printer.
2. Press the “reset” button (circle with red triangle pointing downwards) and without releasing it, press the “on / off” button.
3. Hold down the “on / off” button and release the “reset” button.
4. For MX410: press the “reset” button 5 times, then release the “power” button.
5. For MX320: press the “reset” button twice, then release the “power” button.

The printer is turned on and the printer screen is black or the text “Service mode” is visible.

How to Fix Canon MP237 Error Code 5B00

Canon MP237 Error Code 5B00
Step 3:

Use the attached software: ServiceTool.

1. Turn off the printer.
2. Press the “reset” button (circle with red triangle pointing downwards) and without releasing it, press the “on / off” button.
3. Double-click on the file.
4. Click on “execute”.

The following screen is then visible:

Wait a few seconds for the software to recognize your printer and the areas are not dimmed.

– 1. Then click on “Main”, a blank page comes out of the printer.
– 2. Press the “reset” button (circle with red triangle pointing downwards) and without releasing it, press the “on / off” button.
– 3. Click on “EEPROM Clear”.
– 4. Click on “EEPROM”, a page comes out of the printer.
– 5. Turn off the printer, then turn it back on.

If that does not work, contact your Cartridge World store.

LEAVE A REPLY

Please enter your comment!
Please enter your name here